EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Kent King's Discussions (946)

Discussions Replied To (881) Replies Latest Activity

"Great - I'd still double check the wall outlet to be sure it is wired right. In most…"

Kent King replied Feb 11, 2021 to Restoring My Scott SLRM

35 Feb 12
Reply by Michael Lawton

"It does say you need to have the "hot" side of the AC line to pin #1. I'd use a pola…"

Kent King replied Feb 9, 2021 to Restoring My Scott SLRM

35 Feb 12
Reply by Michael Lawton

"Lars - The signal generator idea is good - you can create a very strong signal to se…"

Kent King replied Feb 8, 2021 to AW-12 Deluxe AVC-- IF alignment and part question

30 Oct 9, 2021
Reply by Lars Edwards

"I've been pulling the replacements from my parts sets. It is odd and two in one chas…"

Kent King replied Feb 2, 2021 to Philly BOL restoration problems

29 Mar 5, 2021
Reply by David C. Poland

"Interesting - Scott used different plugs in many places to avoid customer problems,…"

Kent King replied Feb 1, 2021 to AW-23 Used Different Chassis to Amp Plugs??

6 Feb 1, 2021
Reply by Scott Seickel

"Well, I found lots of little grounding issues when I took the 23 apart. The screws o…"

Kent King replied Feb 1, 2021 to AW23 osc issue

9 Feb 1, 2021
Reply by Kent King

"Update - So I took this set down a bit and replaced all the rubber covered wire in t…"

Kent King replied Jan 31, 2021 to AW23 osc issue

9 Feb 1, 2021
Reply by Kent King

"The only item I bought for myself was a box of early Radio Age magazines - resulting…"

Kent King replied Jan 31, 2021 to AW23 osc issue

9 Feb 1, 2021
Reply by Kent King

"Thanks Norman...I have decided I'm going to remove the tuning cap and refresh it. I…"

Kent King replied Jan 29, 2021 to AW23 osc issue

9 Feb 1, 2021
Reply by Kent King

"I have tried several tubes, currently using a NOS mil spec 76. I next need to remove…"

Kent King replied Jan 29, 2021 to AW23 osc issue

9 Feb 1, 2021
Reply by Kent King

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service