EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

mike hadley's Discussions (311)

Discussions Replied To (273) Replies Latest Activity

"Robert; Making dogbones is the way to go, once you have the mold it's good for at le…"

mike hadley replied Jan 7, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Robert; I have been in the electronics trade for some 40+ years now and the size of…"

mike hadley replied Jan 5, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Norman, I totally agree on this, as there seem to be so many variations with these s…"

mike hadley replied Jan 1, 2018 to Scott 16 parts advice

10 Jan 2, 2018
Reply by Kent King

"If the speaker is the 12" cast basket model, there are cones that will fit on ebay,…"

mike hadley replied Jan 1, 2018 to Scott 16 parts advice

10 Jan 2, 2018
Reply by Kent King

"Troy, the escutcheon has a frosted plastic window with colored stripes representing…"

mike hadley replied Dec 21, 2017 to Modified Allwave 23 questions

105 May 6, 2020
Reply by Kent King

"Troy; Polypropylene motor run caps are very good for filter caps, the DC rating is a…"

mike hadley replied Dec 11, 2017 to Just acquired first EH Scott radio, an Allwave 12, and have some questions.

24 Jan 20, 2021
Reply by Troy Taylor

"Troy; there is a solution to the missing cap in your power supply, my aw15 had the v…"

mike hadley replied Dec 11, 2017 to Just acquired first EH Scott radio, an Allwave 12, and have some questions.

24 Jan 20, 2021
Reply by Troy Taylor

"Mark; I have been thinking about your problem and maybe stating the obvious, to chec…"

mike hadley replied Nov 5, 2017 to Need help...Scott Allwave 12 manual and schematic

29 Nov 5, 2017
Reply by David C. Poland

"Mark, A quick tip, when you desolder the lug nearest the red dot, melt the solder wi…"

mike hadley replied Nov 2, 2017 to Need help...Scott Allwave 12 manual and schematic

29 Nov 5, 2017
Reply by David C. Poland

"Mark; It takes a few minutes work with a hot iron (800f tip) and some soderwick to g…"

mike hadley replied Nov 2, 2017 to Need help...Scott Allwave 12 manual and schematic

29 Nov 5, 2017
Reply by David C. Poland

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service