EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Scott Petersen's Discussions (12)

View

Discussions Replied To (11)	Replies	Latest Activity
"It'll take me a little while to get back into the radio, to check further. I'll let…" Scott Petersen replied May 29, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"It seemed to drop the level of a strong station when I adjusted it. Does that also w…" Scott Petersen replied May 29, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"I measured a little over 40 ohms on that one. The tuning frequency matches the dial…" Scott Petersen replied May 28, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"Well... I brought it back to my friend, the 3 shortwave bands work extremely well, b…" Scott Petersen replied May 27, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"When they say to attach the sig gen to the grid of the 6A7, that is the cap on the t…" Scott Petersen replied May 24, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"It's like I have trouble separating the signal from the noise. I tried a modern radi…" Scott Petersen replied May 24, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"Yes, I aligned it per the instructions, I certainly saw a peak at each IF adjustment…" Scott Petersen replied May 24, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"The set is completely quiet without an antenna, and with a RF generator the 400hz to…" Scott Petersen replied May 24, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"The receiver seems to be better, but I still have the same basic problem,The station…" Scott Petersen replied May 24, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen
"Hi Norman, They are correct then, a few of the set screws were loose though. Thank Y…" Scott Petersen replied May 23, 2018 to My friend asked him to help him with Allwave 23	17	May 29, 2018 Reply by Scott Petersen

‹ Previous
1
2
Next ›

Welcome to
EH Scott Radio Enthusiasts

Sign Up
or Sign In

© 2024 Created by Kent King. Powered by

Badges | Report an Issue | Terms of Service

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Hello, you need to enable JavaScript to use EH Scott Radio Enthusiasts.

Please check your browser settings or contact your system administrator.

Sign in to chat!