Q4 Wiring Harness

[Dave]

Looking for complete or partial harness for AW23 tweeters. Anyone know if the harness terminals or female plugs are common to any other radio ?

[David C. Poland]

The tweeter harness sockets are uncommon, as is an available original harness. Good luck.

The speaker ends of the "Y" harness are female: one 4 pin and the other 5 pin sockets, because one tweeter has a tapped field coil.. The harness male end that plugs into socket # 1 of the pedestal speaker, after moving the short cable from socket #1 to socket #2 (see the AW-23 instruction manual). Moving the short cable to socket #2 allows substitution of the tweeter fields for the big power resistor in the base of the Magnavox pedestal speaker

The two tweeters voice coils are wired in series with a fairly high voltage cap as a crossover. Refer to the amp diagram for wiring.

[Dave]

Thanks David.