EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

There have been some modifications done to my Philly in the past that I'm in the process of correcting,

the wires between the bass filter network and the front panel control have been removed,

and a screened rubber wire put in its place,

this has also been done between the switched capacitor network and bass filter,

Can anyone provide me with a photo of what should be there, is it a cloth covered screened lead, or a twisted pair,

I have looked at various photo's both here and on the net none of which help,

Many thanks in advance.

Mike

the two rubber wires are marked in the photo

Views: 128

Reply to This

Replies to This Discussion

Should have just emailed me again Mike.  Here is another video for you: 

My bass box is removed, but you can see the hole where the wires would come down. It is weird how someone replaced those on your set. 

https://www.youtube.com/watch?v=AMeoPa1ovHY

Thanks Scott, threading the wires back in is going to be fun,

Mike

Now you see why a video is better to get the routing of the wires.  It would be difficult with pictures.  Have fun threading...

Reply to Discussion

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service