EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Robert Feenstra's Discussions (185)

Discussions Replied To (178) Replies Latest Activity

"Thanks Mike!  Yes, I am aware of the heaters next to the tranny.  I should get my IR…"

Robert Feenstra replied Mar 29, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"Mostly finished!  I re-glued many joints in the cabinet and then reinstalled the rad…"

Robert Feenstra replied Mar 29, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"Thanks Mike."

Robert Feenstra replied Mar 28, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"Oh, and one more question.  My 6L6's are by no means matched.  One pair is much newe…"

Robert Feenstra replied Mar 28, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"Neither my AM/FM Philly, nor this BOL have the Jones plug.  The AM/FM has a small ro…"

Robert Feenstra replied Mar 28, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"Thanks for the info, David.  There is no  cap mounted on the tweeters.  In fact, mea…"

Robert Feenstra replied Mar 27, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"Tweeter question.  The schematic shows a 2 mfd crossover cap in series with the seri…"

Robert Feenstra replied Mar 27, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"My B+ was reading around 217 volts and I couldn't find anything that was drawing too…"

Robert Feenstra replied Mar 25, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"Thanks Scott.  On some radios, they are supposed to provide a RF return to ground th…"

Robert Feenstra replied Mar 22, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

"I do it just a little differently, David.  I use a belt sander to grind off the roll…"

Robert Feenstra replied Mar 21, 2020 to Philly BOL Schematic

65 Nov 23, 2020
Reply by Robert Feenstra

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service