EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Scott Seickel's Discussions (436)

Discussions Replied To (417) Replies Latest Activity

"The one on the upper right is a switch to turn the scratch suppressor on/off.  Reall…"

Scott Seickel replied Jan 18, 2015 to Mods to Phillys

57 Jan 19, 2015
Reply by Y2K Bruce

"Mark Oppat is the go-to guy for replacement pots."

Scott Seickel replied Jan 17, 2015 to Philly Loose Ends during Startup

50 Jan 28, 2015
Reply by David C. Poland

"   David, I cannot seem to find this issue of Scott News on this web site's Google…"

Scott Seickel replied Jan 14, 2015 to My First Scott...

15 Jan 15, 2015
Reply by David C. Poland

"So Angelo, your set is a 7 knob set? I am thinking that the UHF circuit alteration w…"

Scott Seickel replied Jan 12, 2015 to Philharmonic UHF band circuit variations

12 Jan 12, 2015
Reply by David C. Poland

"I have scanned the early Philharmonic schematic and put it in PDF format.  If anyone…"

Scott Seickel replied Jan 11, 2015 to Philharmonic UHF band circuit variations

12 Jan 12, 2015
Reply by David C. Poland

"Joe, I believe that the dial went to 80 Mhz before this revision, then it went to 60…"

Scott Seickel replied Jan 10, 2015 to Philharmonic UHF band circuit variations

12 Jan 12, 2015
Reply by David C. Poland

"This indicates that the change was made in early 1939.  The right column near…"

Scott Seickel replied Jan 10, 2015 to Philharmonic UHF band circuit variations

12 Jan 12, 2015
Reply by David C. Poland

"Yes.  The circuit you are working on is from the schematic dated May 15, 1937.  The…"

Scott Seickel replied Jan 10, 2015 to Philharmonic UHF band circuit variations

12 Jan 12, 2015
Reply by David C. Poland

"There are also a couple of 1 meg resistors there that you will want to check. "

Scott Seickel replied Jan 4, 2015 to Mods to Phillys

57 Jan 19, 2015
Reply by Y2K Bruce

"There is a video on You Tube of the manufacturer of an AW-15.  Scott used a neat sta…"

Scott Seickel replied Jan 4, 2015 to How do you support your Scott chassis while working on it?

21 Sep 15, 2017
Reply by David Wilson

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service