EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Kent King's Discussions (1,006)

Discussions Replied To (934) Replies Latest Activity

"Good! I did have an AW12 transformer, but glad you won't need it. On the 12, check t…"

Kent King replied Apr 3, 2024 to The first Allwave 12 Deluxe

39 Apr 7, 2024
Reply by Kent King

"Oh, that is bad...let me check. I have a large supply of parts and quite a few power…"

Kent King replied Apr 3, 2024 to The first Allwave 12 Deluxe

39 Apr 7, 2024
Reply by Kent King

"John - That is interesting, with today's high line voltages, I always use the "Hi" s…"

Kent King replied Mar 28, 2024 to AW 23 amplifier voltages low

5 Apr 3, 2024
Reply by John Stafford

"Dick - Don't power up the amp without the tuner and speaker, the voltage on the fir…"

Kent King replied Mar 27, 2024 to The first Allwave 12 Deluxe

39 Apr 7, 2024
Reply by Kent King

"Probably not...I think the early AW12 just had an R/C circuit there for the cathode…"

Kent King replied Mar 27, 2024 to The first Allwave 12 Deluxe

39 Apr 7, 2024
Reply by Kent King

"What do you meaning by losing the 5Z3 filament? Does the tube go bad (filament open)…"

Kent King replied Mar 24, 2024 to Help needed

21 Mar 25, 2024
Reply by David C. Poland

"I don't recall the exact voltage but it will be very high, as there is a significant…"

Kent King replied Mar 23, 2024 to Help needed

21 Mar 25, 2024
Reply by David C. Poland

"Yes, I had that Philly in the TX auction. Thanks everyone!! Kent"

Kent King replied Mar 21, 2024 to Scott serial numbers

521 Dec 6, 2024
Reply by Kent King

"As long as they are at least 450VDC, you should be fine. I think Scott used a 475VDC…"

Kent King replied Mar 20, 2024 to The first Allwave 12 Deluxe

39 Apr 7, 2024
Reply by Kent King

"Dick - The 3 on the B+ lines are all 8MFD. The other is a 2MFD cap. The values are n…"

Kent King replied Mar 19, 2024 to The first Allwave 12 Deluxe

39 Apr 7, 2024
Reply by Kent King

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service