EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

David C. Poland's Discussions (1,350)

Discussions Replied To (1311) Replies Latest Activity

"Yes. The 12 inch Magnavox speaker with Scott decal having the 8 pin octal cable plug…"

David C. Poland replied Nov 2 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"the pair of 6V6 tubes on the power supply are the final amplifier output tubes. "

David C. Poland replied Nov 2 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"the Masterpiece audio upgrade was a pair of push-pull 6J5 drivers instead of a singl…"

David C. Poland replied Nov 1 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Incidentally, the Scott Masterpiece has remarkably good audio. With the speaker is a…"

David C. Poland replied Nov 1 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Here is a reference for you of the Scott Masterpiece I had showing correct escutcheo…"

David C. Poland replied Oct 31 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Randy, FYI - best to use 3/8 inch thick stock like Scott did, to assure the properly…"

David C. Poland replied Oct 30 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"you proposing to cut a panel if you had a pencil drawing as a pattern?  And do you h…"

David C. Poland replied Oct 29 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Looking at the entire July 1937 diagram, suggests the T10 transformer used was an "o…"

David C. Poland replied Oct 29 to McMurdo-Silver Masterpiece VI T10 Interstage Transformer Missing

1 Oct 29
Reply by David C. Poland

"A 38 ohm voice coil will read about 30 to 32 ohms on a VTVM - about what Scott said "

David C. Poland replied Oct 28 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Unusual to replace the voice coil on a re-cone job. I have had several examples of t…"

David C. Poland replied Oct 28 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service