EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Joe Miller's Discussions (239)

Discussions Replied To (197) Replies Latest Activity

"Here's what I've learned: My phono is indeed the one shown schematically in the AW2…"

Joe Miller replied Aug 10, 2012 to Can't find switch

15 Aug 13, 2012
Reply by Joe Miller

"Norman, Thanks for the info.  Also talked with Kent King at Radiofest this weekend.…"

Joe Miller replied Aug 5, 2012 to AW23 Phono

5 Aug 5, 2012
Reply by David C. Poland

"Hi Norman, Yes that marking is exactly what is on the tone arm. Here are some pictur…"

Joe Miller replied Aug 2, 2012 to AW23 Phono

5 Aug 5, 2012
Reply by David C. Poland

"I aligned it in Sharp mode per the specs.  I don't plan to do any further alignments…"

Joe Miller replied Jul 27, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Got It fixed!   I was able to chase the open winding back 1/2 turn and found the bre…"

Joe Miller replied Jul 26, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"May have found the problem The 3rd IF transformer secondary (between 2nd and 3rd IF…"

Joe Miller replied Jul 24, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Bill, Norman, Completed alignment at 471KC--only needed minor tweaking.  Still have…"

Joe Miller replied Jul 23, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"I checked to see if there was an IF frequency noted in grease pencil on the chassis…"

Joe Miller replied Jul 22, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Oh and by the way,  I connected my sig gen to the grid cap on the converter tube thr…"

Joe Miller replied Jul 22, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Bill, Hooked up my sig gen and frequency counter to align the IFs.  My as found cond…"

Joe Miller replied Jul 22, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service