Allwave 12 Deluxe mystery - EH Scott Radio Enthusiasts2024-03-28T22:47:32Zhttps://ehscott.ning.com/forum/topics/allwave-12-deluxe-mystery?commentId=3925821%3AComment%3A122609&xg_source=activity&feed=yes&xn_auth=noDavid,
Thank you for the weal…tag:ehscott.ning.com,2022-05-08:3925821:Comment:1226092022-05-08T17:05:51.752ZJohn Chidgeyhttps://ehscott.ning.com/profile/JohnChidgey
<p>David,</p>
<p>Thank you for the wealth of Scott knowledge as always. The PS cable has made its way to the proper location hole.</p>
<p>David,</p>
<p>Thank you for the wealth of Scott knowledge as always. The PS cable has made its way to the proper location hole.</p> John - That is certainly poss…tag:ehscott.ning.com,2022-05-08:3925821:Comment:1226062022-05-08T01:58:58.155ZDavid C. Polandhttps://ehscott.ning.com/profile/DavidCPoland
<p>John - That is certainly possible. </p>
<p>The April 1932 Scott News Vol 5 #7 page 5 pictures the 2-DIAL model in the WELLINGTON radio/phono Gothic console. The Wellington was a new Scott cabinet (not listed in my 1/1/1932 price list for the 2-DIAL model).</p>
<p>My ORLEANS highboy 2-Dial has 2 holes like yours drilled below the top hinges, to hold the shortwave coil rack.</p>
<p>Equally likely, the cabinet was cut for the 2-DIAL but assembled and finished for the newer single dial Deluxe,…</p>
<p>John - That is certainly possible. </p>
<p>The April 1932 Scott News Vol 5 #7 page 5 pictures the 2-DIAL model in the WELLINGTON radio/phono Gothic console. The Wellington was a new Scott cabinet (not listed in my 1/1/1932 price list for the 2-DIAL model).</p>
<p>My ORLEANS highboy 2-Dial has 2 holes like yours drilled below the top hinges, to hold the shortwave coil rack.</p>
<p>Equally likely, the cabinet was cut for the 2-DIAL but assembled and finished for the newer single dial Deluxe, with the proper control panel. </p>
<p>I have a Roslyn AW-23 7 knob and a Napier AW-15 that were both obviously cut for the prior model. Likely cabinets were cut in batches by Rockford Peerless Furniture Co ready to assemble upon receipt of a cabinet order, which explains small modifications (plugged holes or unused holes) to accommodate the next model Scott.</p>
<p>FYI - The shelf hole to the right rear is located to direct the set cable to the proper corner location of the PS below, same as for my Wellington with AW-15.</p>