EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

I've been restoring the early (5 knob) AW23 that was found on a trash pile in Columbus. This was the lightning strike set I wrote about in a different post a couple weeks ago. 

This is a VERY early AW23, there are several unique things about this set:

First, the grid lead to the mixer (6A7)...in most sets, the lead comes out through the large tuning cap cover and feeds through a hole in a phenolic piece riveted to the 6B7 shield base. On this set, there is a single terminal tie point riveted on the 6B7 shield and there is a solder joint to continue on to the grid cap:

The next oddity was the IF coil covers. The picture tells all:

How many of you with early AW23 sets have these two differences on your chassis?

Kent

Views: 83

Comment

You need to be a member of EH Scott Radio Enthusiasts to add comments!

Join EH Scott Radio Enthusiasts

Comment by Kent King on September 14, 2022 at 9:36pm

Yes, finished and returned to the owner some time ago - he enjoys listening to it. The green band is really tricky sometimes.

Kent

Comment by Thomas Day on September 14, 2022 at 1:10pm

Hi Kent. Have you been able to complete the work on this chassis?
I have J497 working, except for the green band, which I need to figure out, as it does shut down the regulators about half way to the low end. I have done the Scott modification shown, but it hasn’t made a difference. Then, my first Allwave 23, K 486 quit working a couple of weeks ago, I think it may be that the oscillator quit, since there is still noise and static with tests on the grid caps. When I gave you the info on K 486, l mistakenly said it was K 480. 
Thanks, Thom. 

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service