Thank you very much. Looks nice. Are we posting these questions and answers in the right place on this site? Not sure how to navigate this site yet. Thanks again keep it coming in!!!
As to the switch on the amp chassis, it selects either 110 or 120 volt power. The switch on the leads from the amp is the power switch and mounts in the hole on the top right side of the cabinet.
Welcome to the list. I have an Allwave23 in the smaller version of your cabinet, also minus the tweeters. I have done a recap on the radio chassis, and had a new power transformer built. It plays ok, but the alignment is way off.
EH Scott Radio Enthusiasts
The Fine Things are Always Hand Made
Todd landis's Comments
Comment Wall (3 comments)
You need to be a member of EH Scott Radio Enthusiasts to add comments!
Join EH Scott Radio Enthusiasts
Thank you very much. Looks nice. Are we posting these questions and answers in the right place on this site? Not sure how to navigate this site yet. Thanks again keep it coming in!!!
As to the switch on the amp chassis, it selects either 110 or 120 volt power. The switch on the leads from the amp is the power switch and mounts in the hole on the top right side of the cabinet.
Hi Todd:
Welcome to the list. I have an Allwave23 in the smaller version of your cabinet, also minus the tweeters. I have done a recap on the radio chassis, and had a new power transformer built. It plays ok, but the alignment is way off.
These are great radios.
Welcome to
EH Scott Radio Enthusiasts
Sign Up
or Sign In
© 2024 Created by Kent King. Powered by
Badges | Report an Issue | Terms of Service