The Fine Things are Always Hand Made
Resistor values in Phantom
Did Scott use a unique color coding system for their resistors? I'm restoring a Phantom Deluxe and none of the resistor measured values match the colors. Is there a key someplace to these color codes? Thanks
Replies to This Discussion
-
Permalink Reply by Norman S Braithwaite on
-
The resistors used in Scott sets of that time were color coded in the body-end-dot format but a band was used for the dot. Hence a resistor with a red body, black end, and yellow band (stripe) is 200,000-ohms.
Norman
-
Permalink Reply by Thomas Lager on
-
Thanks big help.
© 2024 Created by Kent King.
Powered by
