The Fine Things are Always Hand Made
Allwave 23 oscillatorr bypass caps
HI:
I have seen a schematic or picture of the bypass caps added to the filament connections of the oscillator tube in the allwave 23. I thought I had printed it out but cannot find it. Are the caps .05 or .1 ufd?
This is the early version chassis.
Thanks
Thom
I have seen a schematic or picture of the bypass caps added to the filament connections of the oscillator tube in the allwave 23. I thought I had printed it out but cannot find it. Are the caps .05 or .1 ufd?
This is the early version chassis.
Thanks
Thom
Replies to This Discussion
-
Permalink Reply by Norman S Braithwaite on
-
They are 0.05-200. The very earliest AW-23 sets did not have these filters.
Norman
-
Permalink Reply by Thomas Day on
-
Thanks Norman.
© 2024 Created by Kent King.
Powered by
