EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Bruce's Discussions

What would you do?

Started this discussion. Last reply by David C. Poland Dec 21, 2022. 9 Replies

Hi, I have been thinking about putting a aw23 in in this cabinet but I…Continue

 

Bruce's Page

Latest Activity

Bruce replied to Joe Miller's discussion AW 15 Amp Problem
"could the schematic that differs from the rider version be for the aw12 w/6pin jones?"
Dec 20, 2023
Bruce replied to Kent King's discussion Scott serial numbers
"Hi Kent Here is the Sn# D-426it's a 1934 AW-15 Wunderlich set, with the dual antenna switch,3 antenna post (1 blk/2 red).apparently unopened, riveted.No other switches on rear just a hole in chassis for bfo adj. Bruce"
Dec 18, 2023
David C. Poland replied to Bruce's discussion What would you do?
"You want to keep the power transformer away from the tuner audio section. So reverse the power supply so power transformer is on the left as you face the back of the cabinet."
Dec 21, 2022
Bruce replied to Bruce's discussion What would you do?
"Thank you! for checking out the alignment of the holes for the controls. that's what I thought the aw23 speaker is deeper so for this to fit i would have to add a shelf to move the power supply up like in this pic"
Dec 21, 2022
David C. Poland replied to Bruce's discussion What would you do?
"My original panels for an AW-12 and AW23 line up well for the holes for the AW-12.  So be a matter of drilling the additional holes. May need to adjust the 2 control escutcheons a bit.  My early AW-23 cabinet catalog includes the LEDO (and…"
Dec 20, 2022
Bruce replied to Bruce's discussion What would you do?
"looks like it would fit"
Dec 19, 2022
Kent King replied to Bruce's discussion What would you do?
"Scott built different size cabinets of the same model to hold different chassis. The Tasman is a great example - the regular one and the extra large for the Philly. I once had 3 different size of Waverly here - I am not aware of a larger version of…"
Dec 18, 2022
Bruce replied to Bruce's discussion What would you do?
"looks like the amp would stick out about 1-1/4. The tuners are all the same size the aw23 speaker is about 1" deeper than the aw15 speaker the cabinet is about 12-1/4" deep inside I could screw a 1-1/4" piece of wood on the back of…"
Dec 18, 2022
Norman S Braithwaite replied to Bruce's discussion What would you do?
"Is the cabinet deep enough (front to back) to house an AW-23?  The AW-23 requires a deeper cabinet to hold the tuner chassis and to accommodate the power amplifier behind the pedestal speaker. Norman "
Dec 18, 2022
Bruce replied to Bruce's discussion What would you do?
"I don't think it's the original finish. this is how it looked when i bought it on Ebay in 2011 all i did to it was add the "Z" in the middle of the grill and repair some of the veneer on the bottom I would not do the switch…"
Dec 18, 2022
Kent King replied to Bruce's discussion What would you do?
"I gather from the pics that the cabinet is refinished? It looks a bit light compared to original cabinets, but you never know what variations Scott might have sold. The first question would be - will the knobs all line up except the two (or 4)…"
Dec 18, 2022
Bruce posted a discussion

What would you do?

Hi, I have been thinking about putting a aw23 in in this cabinet but I do not want to do that if it will make it worth less because I have modified it WHAT WOULD YOU DO?FYIIt came with a aw12 with very rusty chrome and right now I have a aw15 in thereI removed the BFO button so I would not have to drill the cabinetSee More
Dec 18, 2022
Bruce posted a photo

scott vernier knob

I didn't see this in the archive
Dec 16, 2022
Bruce is now a member of EH Scott Radio Enthusiasts
Dec 16, 2022

Bruce's Photos

  • Add Photos
  • View All

Comment Wall

You need to be a member of EH Scott Radio Enthusiasts to add comments!

Join EH Scott Radio Enthusiasts

  • No comments yet!
 
 
 

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service