"Thanks for the offer but i am going my own way with it."
EH Scott Radio Enthusiasts
"Randy, FYI - best to use 3/8 inch thick stock like Scott did, to assure the properly exposed shafts and dial clearance. The receiver came with a pair of studs protruding on the front corners of the…"
"David, all the panel parts are missing but i can cut a wood panel, better than nothing for now"
"you proposing to cut a panel if you had a pencil drawing as a pattern?
And do you have escutcheons for controls, eye and dial crystal?"
"Looking at the entire July 1937 diagram, suggests the T10 transformer used was an "off the shelf" push-pull for both primary and secondary winding, but the primary side is wired…"
McMurdo-Silver Masterpiece VI T10 Interstage Transformer Missing
Hi! My McMurdo-Silver Masterpiece 6 is currently being professionally restored and the project is going well except for one pretty big road block. The T10 interstage transformer in my unit is…See More
"Thanks, Kent but ill work on it myself and ill post it when its done."
"Randy -
While we do have drilling templates for some models, I am not aware of one for the Masterpiece. I could probably create one, but I won't be able to work on it for a couple weeks.
Kent"
"Last question is there a template here for the wood faceplate of the masterpiece? Mine is missing."
"Ok, so i dont have a 30 ohm VC, its been changed"
