David C. Poland replied to Richard Sowry's discussion New member acquires first Scott radio
"Glad you now have the cabinet info. Print it out to keep with the cabinet. I recall once seeing a brochure showing it and a few other style cabinets."
5 hours ago
Richard Sowry replied to Richard Sowry's discussion New member acquires first Scott radio
"  Thanks David.  A fellow ARF member found this article about the cabinet.  It is from a company called "Excello"."
5 hours ago
David C. Poland replied to John Chidgey's discussion Philharmonic Expander plate resistor
"the 1 meg resister is really small, tucked into the socket between two of the pins. If you have never opened up an eye tube socket, make notes and sketch before you allow any of the pin sleeves come…"
6 hours ago
David C. Poland replied to Richard Sowry's discussion New member acquires first Scott radio
"Very nice cabinet spruce up. Looks like the chrome cleaned up well too, as I suspected when I saw it in the local auction years ago."
6 hours ago
Richard Sowry replied to Richard Sowry's discussion New member acquires first Scott radio
"  As promised, I thought I would show off the finished product on this post so you could see before and after."
6 hours ago
Gary is now a member of EH Scott Radio Enthusiasts
9 hours ago
J.N. Shetler replied to John Chidgey's discussion Philharmonic Expander plate resistor
"The 1Meg resistor associated with eye tubes is almost always found in the socket at the end of the harness."
15 hours ago
J.N. Shetler replied to J.N. Shetler's discussion Scott AW23 tweeter info needed.....
"Thanks Dave, I've done field coils before, so have already tried the "basics". There's an "open" deep within the varnished coil so not an easy fix this time. I guess…"
15 hours ago
John Chidgey replied to J.N. Shetler's discussion Scott AW23 tweeter info needed.....
"I believe Alabama antique radio society rewinds field coils. They did one for me a few years back."
18 hours ago
John Chidgey posted a discussion

Philharmonic Expander plate resistor

Hello,Has anyone replaced the 1meg plate resistor for the 6E5 Expander tube?For the life of me I can't find it on the chassis. Is it in the socket harness?JohnSee More
18 hours ago