EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

David C. Poland's Discussions (1,358)

Discussions Replied To (1319) Replies Latest Activity

"the Masterpiece audio upgrade was a pair of push-pull 6J5 drivers instead of a singl…"

David C. Poland replied Nov 1 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Incidentally, the Scott Masterpiece has remarkably good audio. With the speaker is a…"

David C. Poland replied Nov 1 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Here is a reference for you of the Scott Masterpiece I had showing correct escutcheo…"

David C. Poland replied Oct 31 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Randy, FYI - best to use 3/8 inch thick stock like Scott did, to assure the properly…"

David C. Poland replied Oct 30 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"you proposing to cut a panel if you had a pencil drawing as a pattern?  And do you h…"

David C. Poland replied Oct 29 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Looking at the entire July 1937 diagram, suggests the T10 transformer used was an "o…"

David C. Poland replied Oct 29 to McMurdo-Silver Masterpiece VI T10 Interstage Transformer Missing

5 9 hours ago
Reply by David C. Poland

"A 38 ohm voice coil will read about 30 to 32 ohms on a VTVM - about what Scott said "

David C. Poland replied Oct 28 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Unusual to replace the voice coil on a re-cone job. I have had several examples of t…"

David C. Poland replied Oct 28 to Masterpiece repair project

35 Nov 8
Reply by Randy Rago

"Bret - I subsequently saw a radio (at Estes Auction probably) with a set of the same…"

David C. Poland replied Oct 13 to 2 piece knobs?

9 Oct 16
Reply by Brad Winder

"the logging scale in the form of the little window at the top of the Philly and Phan…"

David C. Poland replied Oct 6 to Philharmonic Laureate Grand oddity

16 Oct 10
Reply by Alex R. Whitaker

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service