EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Robert Feenstra's Discussions (185)

Discussions Replied To (178) Replies Latest Activity

"David, as I unwound the primary, several times the wire either broke or was broken.…"

Robert Feenstra replied Apr 27, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Output transformer question for those of you more technically inclined.  David kindl…"

Robert Feenstra replied Apr 26, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"No, the spring goes down into the brass portion and pushes on the end of the steel p…"

Robert Feenstra replied Apr 22, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Ta da... it works.  I just need to find a ball bearing for the spring.  In the mean…"

Robert Feenstra replied Apr 22, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"No question that the center shaft is missing.  My setup is just a bit different than…"

Robert Feenstra replied Apr 22, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"The bread didn't seem to help much.  There is a part of me that says the face is coa…"

Robert Feenstra replied Apr 22, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"I'll try it!  Who'd a thought."

Robert Feenstra replied Apr 22, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"The Chassis is stripped and ready for re-chroming.  I'll bring it in this week.  Lef…"

Robert Feenstra replied Apr 22, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Well I'll be!  the control works  wired that way.  turns out the center tap is  the…"

Robert Feenstra replied Apr 20, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Thanks Norman. Stripping the chassis has begun.  The closeup of the control is of t…"

Robert Feenstra replied Apr 20, 2018 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service