"could the schematic that differs from the rider version be for the aw12 w/6pin jones?"
The Fine Things are Always Hand Made
Bruce's Discussions
What would you do?
Started this discussion. Last reply by David C. Poland Dec 21, 2022. 9 Replies 0 Likes
Hi, I have been thinking about putting a aw23 in in this cabinet but I…Continue
Bruce's Page
Latest Activity
"Hi Kent
Here is the Sn# D-426it's a 1934 AW-15 Wunderlich set, with the dual antenna switch,3 antenna post (1 blk/2 red).apparently unopened, riveted.No other switches on rear just a hole in chassis for bfo adj.
Bruce"
"You want to keep the power transformer away from the tuner audio section.
So reverse the power supply so power transformer is on the left as you face the back of the cabinet."
"Thank you! for checking out the alignment of the holes for the controls. that's what I thought the aw23 speaker is deeper so for this to fit i would have to add a shelf to move the power supply up like in this pic"
"My original panels for an AW-12 and AW23 line up well for the holes for the AW-12.
So be a matter of drilling the additional holes. May need to adjust the 2 control escutcheons a bit.
My early AW-23 cabinet catalog includes the LEDO (and…"
"Scott built different size cabinets of the same model to hold different chassis. The Tasman is a great example - the regular one and the extra large for the Philly. I once had 3 different size of Waverly here - I am not aware of a larger version of…"
"looks like the amp would stick out about 1-1/4. The tuners are all the same size
the aw23 speaker is about 1" deeper than the aw15 speaker
the cabinet is about 12-1/4" deep inside
I could screw a 1-1/4" piece of wood on the back of…"
"Is the cabinet deep enough (front to back) to house an AW-23? The AW-23 requires a deeper cabinet to hold the tuner chassis and to accommodate the power amplifier behind the pedestal speaker.
Norman "
"I don't think it's the original finish. this is how it looked when i bought it on Ebay in 2011 all i did to it was add the "Z" in the middle of the grill and repair some of the veneer on the bottom I would not do the switch…"
"I gather from the pics that the cabinet is refinished? It looks a bit light compared to original cabinets, but you never know what variations Scott might have sold. The first question would be - will the knobs all line up except the two (or 4)…"
What would you do?
Hi, I have been thinking about putting a aw23 in in this cabinet but I do not want to do that if it will make it worth less because I have modified it WHAT WOULD YOU DO?FYIIt came with a aw12 with very rusty chrome and right now I have a aw15 in thereI removed the BFO button so I would not have to drill the cabinetSee More
Bruce's Photos
© 2024 Created by Kent King.
Powered by
