The Fine Things are Always Hand Made
jonathan dollimore's Likes
April 2023
Finally done.
I just installed the tweeters in my pointer dial Laurate Grande Philharmonic. To demonstrate the potential of this radio I found a retired RF engineer who is building a 10 watt 25kc bandwidth transmi…
Discussion
Finally done.
3 Likes
May 2018
wooden knobs
After buying a Philharmonic pointer dial with no knobs, I thought that a set of Scott style wooden knobs as fitted to the Allwave sets would look ok,
the original knobs appear to be made from Walnut…
Discussion
wooden knobs
2 Likes
September 2017
homemade parts escutcheons bezels etc
Inspired by a recent post from Dave Poland, I thought that I would show a method of reproducing dial escutcheons etc, first is epoxy and the second from a process I used to mess around with as a kid,…
Discussion
homemade parts escutcheons bezels etc
3 Likes
June 2017
late 1930's Scott speakers
What I have learned about Scott speakers and optional tweeters. There are sets missing speakers and locating suitable speakers can be a challenge.
A) Tweeters were optional for the AW-23, Philharmon…
Discussion
late 1930's Scott speakers
1 Like
February 2017
Speaker Cabinet Done
Today I finished putting together the speaker cabinet I have been working on for my 800B. I had decided to go with this approach using a custom enclosure so I could control the response of the design…
Discussion
Speaker Cabinet Done
2 Likes
© 2024 Created by Kent King.
Powered by
