EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Norman S Braithwaite's Discussions (842)

Discussions Replied To (833) Replies Latest Activity

"The full run of 10,000+/- 800B receiver chassis were made between February 1946 and…"

Norman S Braithwaite replied Nov 3, 2016 to Early versus Late 800B Tuning Switches

18 Nov 10, 2016
Reply by Joseph W Strickland

"Swapping the push button assemblies would be a substantial endevour.  I do not know…"

Norman S Braithwaite replied Nov 2, 2016 to Early versus Late 800B Tuning Switches

18 Nov 10, 2016
Reply by Joseph W Strickland

"Joe: The early version of glide employed by Scott Radio Laboratories used ball beari…"

Norman S Braithwaite replied Nov 1, 2016 to 800B Tuner Chassis Slides

10 Nov 1, 2016
Reply by Joseph W Strickland

"Joe: You will have to remove the umbilical cord and send it in to YnZ so they can dr…"

Norman S Braithwaite replied Oct 28, 2016 to 800B Tuner Chassis Slides

10 Nov 1, 2016
Reply by Joseph W Strickland

"I wish I lived closer!  By any chance, did you find a box with a speaker? Norman"

Norman S Braithwaite replied Oct 28, 2016 to Free To Good Home

5 Oct 30, 2016
Reply by David C. Poland

"The glides are a little longer than 15-inches.  They extend approximately 3-inches b…"

Norman S Braithwaite replied Oct 28, 2016 to 800B Tuner Chassis Slides

10 Nov 1, 2016
Reply by Joseph W Strickland

"Glides turn up on parts chassis for reasonable prices from time to time.  The challe…"

Norman S Braithwaite replied Oct 26, 2016 to 800B Tuner Chassis Slides

10 Nov 1, 2016
Reply by Joseph W Strickland

"That is an AM "beam of light" Philharmonic in a Rivinia Grande console.  The Rivinia…"

Norman S Braithwaite replied Oct 25, 2016 to New Guy

1 Oct 25, 2016
Reply by Norman S Braithwaite

"With 25 cycle power transformer as is also the case for the AW-23 in auction 3021163…"

Norman S Braithwaite replied Oct 24, 2016 to Philharmonic red dial on eBay merits comment

2 Oct 24, 2016
Reply by David C. Poland

"After wiping off the excess, I just keep the surface clean and dusted with an occasi…"

Norman S Braithwaite replied Oct 12, 2016 to Refinishing

7 Oct 23, 2016
Reply by Dave

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service