EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

David C. Poland's Discussions (1,291)

Discussions Replied To (1252) Replies Latest Activity

"Troy- - dial insert - your receiver has the additional (2nd) antenna post, so choose…"

David C. Poland replied Dec 21, 2017 to Modified Allwave 23 questions

106 Oct 6, 2024
Reply by Pedro

"Your cabinet is the PLYMOUTH. Yours looks very nice, with the original cloth, too. I…"

David C. Poland replied Dec 21, 2017 to Just acquired first EH Scott radio, an Allwave 12, and have some questions.

24 Jan 20, 2021
Reply by Troy Taylor

"Jonathan  -  On the  Philharmonic - location of less obvious caps to replace- -some…"

David C. Poland replied Dec 19, 2017 to Problem with Philharmonic

4 Dec 20, 2017
Reply by jonathan dollimore

"My references for knob placement are Scott marketing material - price lists, Scott N…"

David C. Poland replied Dec 17, 2017 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Did you replace the filter caps and the smaller wax/paper/foil caps  ? A shorted cap…"

David C. Poland replied Dec 17, 2017 to Problem with Philharmonic

4 Dec 20, 2017
Reply by jonathan dollimore

"close up photos of the brown bakelite/plastic knobs appear in the photos section. Th…"

David C. Poland replied Dec 17, 2017 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Robert - my repo large tuning knob for your Scott Sixteen is resin, the proper dark…"

David C. Poland replied Dec 16, 2017 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

"Browse this website and the threads on Allwave 23 model for information. FYI - the c…"

David C. Poland replied Dec 11, 2017 to Modified Allwave 23 questions

106 Oct 6, 2024
Reply by Pedro

"Troy - Welcome to this website. Your amp/power supply and the single speaker are cor…"

David C. Poland replied Dec 11, 2017 to Just acquired first EH Scott radio, an Allwave 12, and have some questions.

24 Jan 20, 2021
Reply by Troy Taylor

"Those long shank switches are hard to find. Unplug the set and remove switch from th…"

David C. Poland replied Dec 11, 2017 to All Wave 23 ON-OFF Switch Needed

2 Dec 11, 2017
Reply by Eric Beheim

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service