EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Bill Liers's Discussions (129)

Discussions Replied To (118) Replies Latest Activity

"Joe, You would need to sweep the IF (sweep generator) and monitor the detector outpu…"

Bill Liers replied Jul 27, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Joe, Excellent work! It's amazing that these radios have so much gain that they can…"

Bill Liers replied Jul 26, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Joe,   Since it's not a burn victim, the break is likely close to the surface and I'…"

Bill Liers replied Jul 24, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Joe, Something is definately not all there. With your plate screen and cathode volta…"

Bill Liers replied Jul 23, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Norman,   You may be right about the Q variation over the small frequency variations…"

Bill Liers replied Jul 23, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Joe, For fun try to peak it at 480 and see what you get on the avc. Then try 465 as…"

Bill Liers replied Jul 22, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Norman, It's certainly true that the exact frequency over this range should make lit…"

Bill Liers replied Jul 22, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Joe,   It's fairly common for owners to tweak the adjustments without a generator or…"

Bill Liers replied Jul 22, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Joe, The reason AVC is disabled during alignment is so that a direct gain measuremen…"

Bill Liers replied Jul 21, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

"Joe,   To determine if and how much the alignment is off, the quickest approach is t…"

Bill Liers replied Jul 21, 2012 to Phantom 19 IF Alignment Help

23 Jul 27, 2012
Reply by Bill Liers

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service