EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Scott Seickel's Discussions (439)

Discussions Replied To (420) Replies Latest Activity

"Are you sure this is a beam of light?  The KK sequence thus far are all dial pointer…"

Scott Seickel replied Jul 11, 2022 to Scott serial numbers

498 Apr 4
Reply by Zach Smith

"Pat, Some Phantom covers just came up on Ebay.  Message the seller, he might have mo…"

Scott Seickel replied Jul 2, 2022 to Intro and info.

33 Sep 5, 2022
Reply by Scott Seickel

"Just to add certainty to my post above, I checked over my diagram.  You need to jump…"

Scott Seickel replied Jun 30, 2022 to Intro and info.

33 Sep 5, 2022
Reply by Scott Seickel

"My diagram is correct.  Pins 2 and 3 and pins 1 and 4 short together at the same tim…"

Scott Seickel replied Jun 30, 2022 to Intro and info.

33 Sep 5, 2022
Reply by Scott Seickel

"Attached is my diagram of the network speaker setup.  You can see from the diagram h…"

Scott Seickel replied Jun 28, 2022 to Intro and info.

33 Sep 5, 2022
Reply by Scott Seickel

"I have tried phosphoric acid  (same ingredient as in naval jelly) and it dulled the…"

Scott Seickel replied Jun 27, 2022 to Rust Removal

4 Jun 27, 2022
Reply by Scott Seickel

"Norman, I have a habit of often testing the capacitors I cut out, and I can't say I…"

Scott Seickel replied Jun 24, 2022 to Intro and info.

33 Sep 5, 2022
Reply by Scott Seickel

"Dubilier made green tubular capacitors that are paper/Mylar.   The capacitor would h…"

Scott Seickel replied Jun 24, 2022 to Intro and info.

33 Sep 5, 2022
Reply by Scott Seickel

"There should be no need to replace them provided they are truly epoxy dipped.  I kno…"

Scott Seickel replied Jun 24, 2022 to Intro and info.

33 Sep 5, 2022
Reply by Scott Seickel

"Interesting dilemma, but I still see it as an alignment problem or possibly the circ…"

Scott Seickel replied Jun 20, 2022 to New member - Scott 16

123 Jun 21, 2022
Reply by Dave McClellan

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service