EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

David C. Poland's Discussions (1,233)

Discussions Replied To (1195) Replies Latest Activity

"Norman, Interesting you had a manual switch to cut out the tweeters on that Philharm…"

David C. Poland replied Feb 26, 2017 to Schematic for Dividing Network Box (Phantom)

27 Mar 2, 2017
Reply by David C. Poland

"Cabinets I have usually have a solid wood (not plywood) baffle made of about 1 inch…"

David C. Poland replied Feb 26, 2017 to tasman cabinet

3 Feb 26, 2017
Reply by David C. Poland

"The Scott Allwave Fifteen (AW-15) came with a 12 inch pedestal auditorium  speaker.…"

David C. Poland replied Feb 25, 2017 to tasman cabinet

3 Feb 26, 2017
Reply by David C. Poland

"The Scott literature research Kent and I did for the Laureate indicated it initially…"

David C. Poland replied Feb 25, 2017 to Schematic for Dividing Network Box (Phantom)

27 Mar 2, 2017
Reply by David C. Poland

"Norman - Thank you. So much for not pulling out my Laureate crossover to examine it …"

David C. Poland replied Feb 24, 2017 to Schematic for Dividing Network Box (Phantom)

27 Mar 2, 2017
Reply by David C. Poland

"Joe - the part "G" is for the tweeter plug (2 pins for audio signal  and 2 pins for…"

David C. Poland replied Feb 24, 2017 to Schematic for Dividing Network Box (Phantom)

27 Mar 2, 2017
Reply by David C. Poland

"FYI - A lot of evolution of design during the 15 or so months in production of the A…"

David C. Poland replied Feb 24, 2017 to Wunderlich substitute

33 Dec 21, 2020
Reply by David Dodgen

"Forgot an obvious visual, the later PHANTOM models have a 7th control located below…"

David C. Poland replied Feb 22, 2017 to Schematic for Dividing Network Box (Phantom)

27 Mar 2, 2017
Reply by David C. Poland

"Some orientation on the Phantom. Helpful to have the new Scott guide 2nd eddition. C…"

David C. Poland replied Feb 22, 2017 to Schematic for Dividing Network Box (Phantom)

27 Mar 2, 2017
Reply by David C. Poland

"Ken - you have to remove the coil wheel to get at some of the caps for replacement.…"

David C. Poland replied Feb 22, 2017 to Allwave Deluxe: Question regarding power supply variation

12 Feb 22, 2017
Reply by Ken Carr

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service