The Fine Things are Always Hand Made
Forum Discussions (1,190)
| Discussions | Replies | Latest Activity |
|---|---|---|
Shicking experienceHello, I assume that the Phantom cross over case should not have 200vdc with respect to the main chassis. Has anyone seen this issue before… Started by John Chidgey |
10 |
May 21, 2021 Reply by John Chidgey |
all wave 15 choke problemHello all I have a Scott all wave 15 LATE with a shorted to ground filter choke(The one mounted on the top of the chassis.) the only info o… Started by norman david warren |
10 |
May 21, 2021 Reply by norman david warren |
Noisy motorHello, I have a phantom with remote control. The motor is very noisy in one direction but quiet in the other. Any thoughts from the group h… Started by John Chidgey |
6 |
May 18, 2021 Reply by John Chidgey |
dynamic scratch supressorHello all The Scott 800B I just got has the optional dynamic scratch supresser I have a Sams photofact on this Does anybody have any experi… Started by norman david warren |
2 |
May 13, 2021 Reply by norman david warren |
Philharmonic B+ voltage dividerHello, This is my first post on the forum. I am restoring my first EH Scott, the 8-knob Philharmonic. There is an open section on the B+… Started by Scott Rhode |
6 |
May 11, 2021 Reply by David C. Poland |
Phantom dial restringing tipsHello all, I need to restring the dial on my Scott Phantom. Any tricks or suggestions from the group would be great. Thanks John Started by John Chidgey |
2 |
May 9, 2021 Reply by Kent King |
FM Converters at KutztownI'll be headed to Kutztown with a few pre-war converters in tow this Friday. If there are any interested parties, Kent has offered to brin… Started by Bill Liers |
10 |
May 8, 2021 Reply by Bill Liers |
sensitivity comparison Phantom to PhilharmonicLooking through Scott News, Scott specified the Philharmonic at 0.5uV sensitivity (I also see Scott used what we now call MDS, which is +3d… Started by Eddie Watts |
0 | May 5, 2021 |
Identify a Scott Super XII cabinet?Hi, all. I have been collecting radios for about 20 years, but only in the last month have I had the courage to dip a toe into the Cadillac… Started by Bret Menassa |
4 |
May 5, 2021 Reply by Kent King |
7 pin socket problemI am in the process of making an adapter for my early Philharmonic radio to fit a late type chassis, the radio has a 7 pin plug, and the ch… Started by mike hadley |
8 |
May 2, 2021 Reply by David C. Poland |
© 2025 Created by Kent King.
Powered by
