The Fine Things are Always Hand Made
Forum Discussions (1,211)
| Discussions | Replies | Latest Activity |
|---|---|---|
PHANTOM PS issueHello Having an issue when connecting the 30mfd input capcitor to the filter chokes. Hums very badly. All other capcitors replaced. Started by John Chidgey |
4 |
May 28, 2021 Reply by John Chidgey |
Scott BFO - can it be used to listen to ham operators?Hi to everyone. Can the Scott BFO be used to listen to ham radio broadcasts. Just wondering about any of the forum members using this featu… Started by bruce edward |
1 |
May 24, 2021 Reply by Norman S Braithwaite |
Shicking experienceHello, I assume that the Phantom cross over case should not have 200vdc with respect to the main chassis. Has anyone seen this issue before… Started by John Chidgey |
10 |
May 21, 2021 Reply by John Chidgey |
all wave 15 choke problemHello all I have a Scott all wave 15 LATE with a shorted to ground filter choke(The one mounted on the top of the chassis.) the only info o… Started by norman david warren |
10 |
May 21, 2021 Reply by norman david warren |
Noisy motorHello, I have a phantom with remote control. The motor is very noisy in one direction but quiet in the other. Any thoughts from the group h… Started by John Chidgey |
6 |
May 18, 2021 Reply by John Chidgey |
dynamic scratch supressorHello all The Scott 800B I just got has the optional dynamic scratch supresser I have a Sams photofact on this Does anybody have any experi… Started by norman david warren |
2 |
May 13, 2021 Reply by norman david warren |
Philharmonic B+ voltage dividerHello, This is my first post on the forum. I am restoring my first EH Scott, the 8-knob Philharmonic. There is an open section on the B+… Started by Scott Rhode |
6 |
May 11, 2021 Reply by David C. Poland |
Phantom dial restringing tipsHello all, I need to restring the dial on my Scott Phantom. Any tricks or suggestions from the group would be great. Thanks John Started by John Chidgey |
2 |
May 9, 2021 Reply by Kent King |
FM Converters at KutztownI'll be headed to Kutztown with a few pre-war converters in tow this Friday. If there are any interested parties, Kent has offered to brin… Started by Bill Liers |
10 |
May 8, 2021 Reply by Bill Liers |
sensitivity comparison Phantom to PhilharmonicLooking through Scott News, Scott specified the Philharmonic at 0.5uV sensitivity (I also see Scott used what we now call MDS, which is +3d… Started by Eddie Watts |
0 | May 5, 2021 |
© 2026 Created by Kent King.
Powered by
