The Fine Things are Always Hand Made
I picked up a tuner and amp at the recent radio auction in Indy, but no speaker. So I am looking for one. It has an octal plug on it and the speaker has two field coils:
One at 680 ohms and the other is 125+65 ohms (it is also split)
Can anyone point me in the right direction?
Thanks,
Joe
Added by Joe Miller on October 1, 2019 at 7:05pm — 2 Comments
I am looking for a PS. Don't need tubes necessarily.
Anyone have one for sale?
Added by Joe Miller on March 13, 2018 at 11:02pm — No Comments
I am working on a Philly amp and am finding a number of wiring mods that deviate from the schematic. Some are due to someone bypassing a bad audio transformer and for adding a second phone plug input with volume/mixing pots.
But I also found a 125 ohm Candohm type resistor that is factory mounted to the side of the amp chassis. It is connected in series to the cap connected to pin 6 of the set plug socket and then tied to ground. It doesn't show on the schematics that I…
ContinueAdded by Joe Miller on July 20, 2016 at 9:57pm — 1 Comment
© 2025 Created by Kent King. Powered by