The Fine Things are Always Hand Made

Scott speaker - but from what?

So, it looks like an AW23 speaker, but it doesn't have the two plugs for the tweeters and the stub cable (and no stub cable). The connector is like that used on the pointer Philharmonic (two large pins not together, not like a 23). Pin testing shows it should work on a Philly - but it is a 12 in and no Philly style tweeter connection either. But tagged Scott...I have two of these BTW...the other one has an AW23 style plug on it and tested it with an AW23 and it works great. Any thoughts appreciated. It isn't an extension speaker either - the connections inside the "Maganavox" door are the same as a 23 speaker. The manuals show a very different terminal strip for the extension speakers.

0 members like this

Comment

You need to be a member of EH Scott Radio Enthusiasts to add comments!

Join EH Scott Radio Enthusiasts

Comment by Fran Mayer on February 8, 2022 at 2:09pm

Comment by Kent King on February 8, 2022 at 10:49am: That is fascinating - I have never seen it set up like that before. If you have a chance, open the plate and take a pic of the terminal connections inside. I'm curious how it is set up - although it can probably be figured out from the manuals. Thank you for posting!

Kent

Comment by Fran Mayer on February 8, 2022 at 10:07am: The AW23 is a later 7 knob unit

Comment by Fran Mayer on February 8, 2022 at 10:06am: Kent,

Here are some photos from my AW23 speaker. Also no plug for the tweeters, but the tweeter cord comes out of the left hole on the access panel.