EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Kent King's Discussions (1,027)

Discussions Replied To (951) Replies Latest Activity

"Thanks Mike! Years ago, the former Scott Historical Society sold these on VHS tape.…"

Kent King replied Feb 4, 2022 to The Manufacture of an E H Scott All Wave 15 Radio Receiver

1 Feb 4, 2022
Reply by Kent King

"Accepted! I'm located in central Ohio, a good distance away unfortunately. I may kno…"

Kent King replied Feb 2, 2022 to NOS wunderlich detector

6 Feb 3, 2022
Reply by Bob Cofer

"Bob -  Well, what do you need? Regarding the Wunderlich tubes - they almost never g…"

Kent King replied Feb 2, 2022 to NOS wunderlich detector

6 Feb 3, 2022
Reply by Bob Cofer

"I use the 10 uf, I keep them in stock for the early Scotts. I'd stick close to the 2…"

Kent King replied Jan 30, 2022 to allwave 12 deluxe - what voltage for filter caps in power supply

4 Jan 31, 2022
Reply by Scott Seickel

"Great, thanks for letting me know! "

Kent King replied Jan 24, 2022 to Allwave 23 sr#J497

39 Feb 9, 2023
Reply by Thomas Day

"The serial number puts it firmly in early 1933. I'm with Dave on the extra controls:…"

Kent King replied Jan 24, 2022 to FrankenScott cabinet , can anyone ID this one?

17 Jan 24, 2022
Reply by Kent King

"The mystery tube is very likely the Wunderlich detector. In the archive area, go to…"

Kent King replied Jan 23, 2022 to 12 tube chassis Identification.

4 Jan 23, 2022
Reply by Bob Cofer

"I'll get it right out!"

Kent King replied Jan 21, 2022 to Allwave 23 sr#J497

39 Feb 9, 2023
Reply by Thomas Day

"I'll check...I may have one. They are more fragile than you might expect. Kent "

Kent King replied Jan 19, 2022 to Allwave 23 sr#J497

39 Feb 9, 2023
Reply by Thomas Day

"Scott - I have a remote control pointer Philly available. I also have my reservation…"

Kent King replied Jan 19, 2022 to Drilling Gothic Grande Cabinet for 9 Knob Set

6 Jan 23, 2022
Reply by Y2K Bruce

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service