EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Norman S Braithwaite's Discussions (842)

Discussions Replied To (833) Replies Latest Activity

"Thanks for your report and warning.  She has been suspended 45 seconds after your po…"

Norman S Braithwaite replied Oct 14, 2017 to KATE KWAME IS SPAMMING US. Please EH Scott administrator. Revoke her fake membership!

2 Oct 16, 2017
Reply by Jon Ketron

"EH Scott Radio Laboratories discontinued the use of Potter capacitors relatively ear…"

Norman S Braithwaite replied Oct 13, 2017 to Allwave 15 in Tasman Cabinet Electrical Restoration

59 May 19, 2019
Reply by Jon Ketron

"Jon:  Those are flat plate versions.  Manufactures changed to the "H" plate version…"

Norman S Braithwaite replied Oct 2, 2017 to Allwave 15 in Tasman Cabinet Electrical Restoration

59 May 19, 2019
Reply by Jon Ketron

"Jon:  Thanks.  If the 2A3 tubes are of the flat plate variety, they are most likely…"

Norman S Braithwaite replied Oct 2, 2017 to Allwave 15 in Tasman Cabinet Electrical Restoration

59 May 19, 2019
Reply by Jon Ketron

"Russ Mappin had contacted John Mitchell himself many years ago.  Others have contact…"

Norman S Braithwaite replied Oct 2, 2017 to John J Mitchell buys biggest Scott...1936 40 tubes

7 Oct 2, 2017
Reply by Jon Ketron

"Jon, are the output tubes really type 2A5 tubes?"

Norman S Braithwaite replied Oct 2, 2017 to Allwave 15 in Tasman Cabinet Electrical Restoration

59 May 19, 2019
Reply by Jon Ketron

"Being that the detector tube socket is unmarked, the set is early and would have ori…"

Norman S Braithwaite replied Oct 2, 2017 to Allwave 15 in Tasman Cabinet Electrical Restoration

59 May 19, 2019
Reply by Jon Ketron

"Several collectors have tried to track down the whereabouts of the Mitchell Quaranta…"

Norman S Braithwaite replied Oct 2, 2017 to John J Mitchell buys biggest Scott...1936 40 tubes

7 Oct 2, 2017
Reply by Jon Ketron

"You are on the list too!"

Norman S Braithwaite replied Sep 22, 2017 to homemade parts escutcheons bezels etc

23 Mar 24, 2024
Reply by mike hadley

"It takes much longer for the silicone product that I used to fully cure than it take…"

Norman S Braithwaite replied Sep 22, 2017 to homemade parts escutcheons bezels etc

23 Mar 24, 2024
Reply by mike hadley

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service