EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Kent King's Discussions (1,020)

Discussions Replied To (945) Replies Latest Activity

"Jiri - Thank you for the serial number, new to me. I don't have any messages here fr…"

Kent King replied May 7, 2020 to A strange custom cabinet (inspired by Laureate Grande)?

3 May 7, 2020
Reply by Kent King

"I would love to get the serial number. The cabinet is reminiscent of a jukebox to me…"

Kent King replied May 6, 2020 to A strange custom cabinet (inspired by Laureate Grande)?

3 May 7, 2020
Reply by Kent King

"Definite LIKE...very nicely done! "

Kent King replied May 6, 2020 to Modified Allwave 23 questions

106 Oct 6, 2024
Reply by Pedro

"For the yellow wire...connect it to the grid lead of the 76 tube that acts as the tu…"

Kent King replied Apr 30, 2020 to Modified Allwave 23 questions

106 Oct 6, 2024
Reply by Pedro

"Welcome Cam! As was said, the 800B is a very complex radio, not one I'd recommend fo…"

Kent King replied Apr 25, 2020 to New to all this! Looking for help/advice!

12 May 10, 2024
Reply by William Taney

"What early advertising items do you have in your collection? "

Kent King replied Apr 12, 2020 to Pre-1930 Scott advertising

2 Apr 12, 2020
Reply by Brad Winder

"As we discussed in email, G-240 (not C) is the odd AW13 set. It has a 6-pin plug so…"

Kent King replied Apr 11, 2020 to Allwave 12 Deluxe

11 Apr 11, 2020
Reply by Kent King

"G-240 Different prefix...and a high number (all Allwave 12 sets end at ?-250, no mat…"

Kent King replied Apr 11, 2020 to Allwave 12 Deluxe

11 Apr 11, 2020
Reply by Kent King

"This is what I thought until I found this chassis...here is my problem...I have an 8…"

Kent King replied Apr 11, 2020 to Allwave 12 Deluxe

11 Apr 11, 2020
Reply by Kent King

"It is worse... So I found an 8-pin AW12 set in the boneyard - complete but only fair…"

Kent King replied Apr 10, 2020 to Allwave 12 Deluxe

11 Apr 11, 2020
Reply by Kent King

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service