EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Scott Seickel's Discussions (457)

Discussions Replied To (438) Replies Latest Activity

"In most cases resistors being out of spec won't leave a radio dead silent unless the…"

Scott Seickel replied Sep 15, 2022 to New to me 16A First Scott

9 Sep 15, 2022
Reply by David Zrout

"Later AM sets had a support plate added behind the shaft, but the hole spacing and s…"

Scott Seickel replied Sep 11, 2022 to E.H. Scott FM Philarmonic parts needed - Tuning shaft & 15'' paper cone

3 Oct 10, 2022
Reply by Felix-A. Gravel

"RR-303, see my post above on previous page where I attached a diagram of the network…"

Scott Seickel replied Sep 5, 2022 to Intro and info.

33 Sep 5, 2022
Reply by Scott Seickel

"Any reason to believe they even came from a Scott?  Lot of tape on those plug leads.…"

Scott Seickel replied Sep 2, 2022 to Which Scott do these Speakers go to?

18 Sep 4, 2022
Reply by Kent King

"If you click on "ARCHIVE" above on the right, you will see "set folders".  click on…"

Scott Seickel replied Aug 20, 2022 to Scott Philharmonic 1937 Pointer Dial

2 Aug 20, 2022
Reply by Stephan Samourkas

"I was just showing the paperwork and speakers for others who might be interested as…"

Scott Seickel replied Aug 7, 2022 to THE MOTHER OF ALL - ALLWAVE 27 CABINETS!

8 Aug 8, 2022
Reply by Norman S Braithwaite

"This is "as found" condition.  Norman, are there any other known examples? "

Scott Seickel replied Aug 7, 2022 to THE MOTHER OF ALL - ALLWAVE 27 CABINETS!

8 Aug 8, 2022
Reply by Norman S Braithwaite

"Warwick Grande.   A friend of mine found same cabinet in Queens NY at the house of o…"

Scott Seickel replied Aug 7, 2022 to THE MOTHER OF ALL - ALLWAVE 27 CABINETS!

8 Aug 8, 2022
Reply by Norman S Braithwaite

"I have been trying to get a couple from Mark for 2 months now....no luck. "

Scott Seickel replied Jul 29, 2022 to Volume pot for Philharmonic.

3 Jul 29, 2022
Reply by Scott Seickel

"They are all either on sets, or are going to be on a set that is in the works.  The…"

Scott Seickel replied Jul 29, 2022 to 2 piece knobs?

9 Oct 16
Reply by Brad Winder

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service