EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

I have seen a schematic or picture of the bypass caps added to the filament connections of the oscillator tube in the allwave 23. I thought I had printed it out but cannot find it. Are the caps .05 or .1 ufd?
This is the early version chassis.

Views: 69

Reply to This

Replies to This Discussion

They are 0.05-200.  The very earliest AW-23 sets did not have these filters.


Thanks Norman.

Reply to Discussion


© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service