EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Good day,

 

I am a new member and would like to hear from anyone who may have some extra cabinet parts for a Scott Philharmonic in a Warrington cabinet. Thank you.

Views: 133

Reply to This

Replies to This Discussion

In case you don't find what you are looking for I am ready to provide you with measurements and photos of Warrington cabinet - for reproduction. I have it with Phantom, but guess the cabinets are the same.

Leonid

Leonid,

 

I seek the far left side eschusion piece "sensitivity/hi-fidelity." Mine on the cabinet was damaged by accident when removing the knob for service. I can either purchase the part or trade against some coil covers I have.

 

Thanks, Kent

OK, I see. I don't have it - there is only "sensitivity" for Phantom.

Would be not easy to find or reproduce (plastic copy painted with bronze?)

Leonid

Ok. Thank you Leonid. I will keep looking and see if any other members respond to my request.

Kent
Leonid Soloviev said:

OK, I see. I don't have it - there is only "sensitivity" for Phantom.

Would be not easy to find or reproduce (plastic copy painted with bronze?)

Leonid

Leonid -

 

A few years ago, a fellow tried to make some plastic painted escutcheons....they were far too thick, you cannot mold the plastic as thin as the metal stamped originals....most unacceptable for us purists...

 

Kent

Reply to Discussion

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service