The Fine Things are Always Hand Made
Kutztown - Things I am bringing
Who's going to Kutztown?
I have the following items I'll be taking to Kutztown. If you are interested in any of these items, please let me know! I will add each item as a reply to this discussion...and please look for me there!
Kent
Replies to This Discussion
-
Permalink Reply by Kent King on
-
McMurdo Silver Masterpiece VI - complete tuner/amp and the 18 in speaker. I will <never> split up a complete set, this is a very restorable set, chrome is decent. I have also located a more suitable power transformer for this set.
-
-
Scott Sixteen in a hard to find Wilshire cabinet. The cabinet and set will need work but it is complete. I have a set of knobs and a dial escutcheon - so you have everything to restore this set.
-
-
An AW 23 in a Windsor cabinet. I can provide a panel with escutcheons, and all knobs, but the panel doesn't fit this cabinet, so there is some cabinet work to do, but not a lot. The chrome on this set is excellent.
-
-
One note on this...I do not have a dial escutcheon. All the other escutcheons are there and it has a set of knobs.
Kent
Kent King said:Scott Sixteen in a hard to find Wilshire cabinet. The cabinet and set will need work but it is complete. I have a set of knobs and a dial escutcheon - so you have everything to restore this set.
-
-
I have everything for the AW23:
Kent King said:An AW 23 in a Windsor cabinet. I can provide a panel with escutcheons, and all knobs, but the panel doesn't fit this cabinet, so there is some cabinet work to do, but not a lot. The chrome on this set is excellent.
-
-
I will also have a Shield Grid 9, which has been operated on a modern power supply, and an unrestored but complete SG9 power supply/amp (hard to find).
-
Permalink Reply by Robert Meader on
-
I have a shield grid 9 but no power supply. I am very interested in the power supply.
In a related item my shield grid 9 has a mixer coil plugged into the oscillator position.
I am planning to modify the mixer coil into a oscillator coil but I need the inductance of the various windings.
If you have an inductance meter could you measure the windings.
bob
© 2024 Created by Kent King.
Powered by
