"Thanks, Kent."
The Fine Things are Always Hand Made
Bob Snively's Discussions
I have questions about my 7-knob BOL Philly with Robot Control
Started this discussion. Last reply by Bob Snively on Monday. 51 Replies 0 Likes
I am starting this discussion because I have questions about my Philharmonic as I embark on a quest to restore it to optimum performance.I have included pics of the dial and knobs. Other than what I…Continue
Bob Snively's Page
Latest Activity
"Thanks, Scott. "
"Alex, I really appreciate the necessary parts to help me with my Philly project. It is certainly great to get the parts and, just as importantly, the visit with you as my long-time friend. You have some very nice radios in your collection and I…"
"I fixed Bob up, today. We took the parts from a junk pointer dial unit I had. "
"I have some Philly parts too, but I can't get to them until next week...
Kent"
"I might have a detent plate available if you can't get that one to work properly. I would have to go thru my boxes of parts. I have many dial pointer parts available. "
"Band switch should not be stiff. pretty simple if all the parts are there. Lubrication issue? "
"As I am going through the controls on the front of the receiver chassis, I notice my wave range switch (band selector) front bearing plate has been jacked with probably due to it's stiff nature. After a thorough cleaning, minor straightening of…"
"Thanks, Scott. I accepted your friend request."
"I sent you a friend request. "
"Scott, your schematic is beautiful! Do you have the entire power supply/amplifier unit schematic available? Any parts list for same? Thank you."
"The later amps all had the 4 pin socket. You can tell the later amps by the 3 filter capacitors in a row, whereas the early amps had 4 that are in a diamond pattern. What Norman said, 2 of those pins are for the ON/OFF switch, and the other…"
"Thank you. "
"I note the 3 topside filter caps are replacements. They appear post war and maybe new enough to still be decent.
The originals were taller and different construction."
"Good that you do have the properly configured amp. Agree with Norman.
As per the amp diagram for the FM combination Philly - The wiring for the "Robot control" for your receiver: the 2 smaller socket holes #1 & #4…"
"Going from a foggy recollection you will just need to add the 24-volt control transformer inside the power amplifier and run the two 24-volt wires to the two unused lugs on the four pin socket. The primary of the control transformer connects…"
Getting started on my Philharmonic
Is Kent King still keeping track of serial numbers? He may have mine since I obtained it from fellow collector Alex Whitaker. Where could I find the best service info for my Philharmonic BOL non-logging scale dial ? It has a remote with motorized tuning and what I believe may be motorized volume? Anyhow, thanks for letting me join a few years ago and am looking forward to getting reacquainted with the hobby since I have been adjusting to retirement.
Comment Wall (2 comments)
- At 10:28am on January 25, 2026,
David C. Poland said…
Bob, I expect your Philly with remote control would indeed have the motorized volume control. and that the location of the bass and volume control are swapped to accommodate the motor and gears for the volume control.
What cabinet do you have?
The Archive Info (top of page) would take you to the set folders where you will find Philharmonic folder. In addition to owners manual, there is a separate item for ROBOT control with specifics for your remote control option radio.
.
- At 8:37pm on November 2, 2022,
Hey Bob, Welcome.
© 2026 Created by Kent King.
Powered by
