The Fine Things are Always Hand Made
WTB
Wanted to buy Philharmonic Scratch Suppressor switch. Think same switch was used on the Allwave 16 as well.
John
Comment
-
Comment by John Chidgey on September 2, 2020 at 7:31pm
-
David: I have reached out to Mark, we'll see what he comes up with.
Kent: Thanks for keeping an eye out!
-
Comment by Kent King on September 2, 2020 at 6:39am
-
John - I do not have a spare...checked last night. Those do get broken, I get asked about them every couple years. I'll keep watch for a parts chassis to see if we can locate one.
Kent
-
Comment by David C. Poland on August 31, 2020 at 9:04pm
-
I take it your switch is missing or broken.
The push-pull switch is not uncommon, but the version with extra long shaft is uncommon.
Yes, it is like the push-pull switch on a Scott model Sixteen.
You might try Mark Oppat https://www.oldradioparts.net
Meanwhile you could use any push-pull switch that fits the radio, and add a length of metal tubing that fits over the switch shaft as an extension. Or buy a rotary on-off switch with long shaft, perhaps from your local hardware store.
© 2024 Created by Kent King.
Powered by
You need to be a member of EH Scott Radio Enthusiasts to add comments!
Join EH Scott Radio Enthusiasts