alwave fifteen under chassis drawing

[mike hadley]

after working on my allwave fifteen I got fed up shuffling between various diagrams so I decided to create the attached drawing, it's taken from the scott archive and I have added all of the main component values circuit locations etc.

I hope this may be of some use

Mike

[Jon Ketron]

Great work Mike, thank you for posting.

Jon

[David C. Poland]

Nice.

[David C. Poland]

Folks, just be aware that the AW-15 evolved so this document may not quite agree with another AW-15. For example - the dual pot shown.

[mike hadley]

Agreed, my chassis does not have the 1st if filter, it has a wave wound coil bolted to the chassis an axial cap to 0v, hence the need for a  homemade wax cap,

there are also versions with the three bathtub caps located under the power resistor moved elsewhere, along with a single pot volume control version, these sets were being modified throughout their production run, most of the other components do remain in their locations so this is meant only as a guide.

Mike

[mike hadley]

Here is a copy of the drawing that refers to my chassis, as David has commented scott had a habit of changing things during production.