"Who is this "Gerry?" I have the Puett book for the MP V, but nothing substantial for the MP VI. If he has reworked, modern schematics, I'd definitely be interested. "
The Fine Things are Always Hand Made
-
Dave
- Male
- Traverse City, MI
- United States
- Blog Posts (1)
- Discussions (164)
- Events
- Photos (11)
- Photo Albums
Dave's Discussions
McMurdo MP4
Started this discussion. Last reply by Alex R. Whitaker Dec 9. 6 Replies 0 Likes
Hello all, been awhile but know some of you may have reworked schematics from Gerry.I've acquired what is considered the 3rd iteration of the MP4, ie with the 6B5 dual triode supply. Any leads for…Continue
800 Console Fan
Started this discussion. Last reply by Kent King Jul 12, 2022. 1 Reply 0 Likes
I'm a big fan of the 800, we're a small group, so delighted to have company.Continue
Rust Removal
Started this discussion. Last reply by Scott Seickel Jun 27, 2022. 4 Replies 0 Likes
Curious of methods and materials best used for chassis rust ? I suspect they'll be some pitting as there are areas beyond "surface" condition.Continue
SLRM's New Home
Started this discussion. Last reply by Dave Nov 12, 2020. 7 Replies 0 Likes
I've been patiently waiting for the "right" cabinet, this one began life as an early FM GE phonograph, a optional cabinet of the same Radio now housing my 800b. Both with the full doors are difficult…Continue
Dave's Page
Latest Activity
"Hello David, thanks for helping out. Cell works where we can exchange email for better resolution as needed."
"Dave - I have Gerry's diagram for a version MP4 with 4 push-pull parallel 6B5's. 2nd AF is a pair of 6C5 drivers on the amp. Two field coil speakers: one each bass and treble.
Diagram date;11/20/35. As usual, no parts values, just…"
"I never got all of Gerry's MS materials. We did an exchange of data once back in 2006, I have everything from then, but that's a long time ago. And nothing in there on the MPIV you need.
Sadly, I haven't talked to him in quite some…"
"No, I have not Kent. I know Dave and others here may have some of Gerry's work, should be a treasure trove but I lost touch with him and not sure his work was printed ?"
"I looked through my MS folder (not very extensive), I only have schematics for the earlier version using the 42 outputs. Hopefully, someone here might have more. Did you post anything on the Antique Radio Forum?
Kent"
McMurdo MP4
Hello all, been awhile but know some of you may have reworked schematics from Gerry.I've acquired what is considered the 3rd iteration of the MP4, ie with the 6B5 dual triode supply. Any leads for this set's schematics is appreciated. DaveSee More
"We've discussed irregularities near ad nauseam re knobs, estrucheons and period "correct" sales pamphlets. Clearly guidance was loose or at Dept. discretion. I doubt tooling for this seemingly "rare" set, was done purposely…"
"Room for pause "
"I have a VERY clean 800B in a cabinet with the 17in Scott (Dumont) direct view TV and phono. I will give it to anyone that stops by to load it up.
Kent"
800 Console Fan
I'm a big fan of the 800, we're a small group, so delighted to have company.See More
"I have tried phosphoric acid (same ingredient as in naval jelly) and it dulled the chrome around the rust spots. I think if you keep it confined to just the rust spots you will do a lot better than I did. Otherwise the best I have…"
"Another method, if you have more significant rust, and you remove some/most of the components, is to use Naval Jelly. Apply, wait, then wash it off with a lot of water and let things dry thoroughly. Repeat if needed. Then polish as Dave…"
"So far, limited to using Turtle brand liquid chrome polish over the past 20 odd years. But then I have avoided heavily corroded items.
Vacuum first while using a modernly stiff artist brush. Use small squares of old towels, gentle pressure and…"
Rust Removal
Curious of methods and materials best used for chassis rust ? I suspect they'll be some pitting as there are areas beyond "surface" condition.See More
Dave's Photos
Comment Wall (3 comments)
- At 11:45pm on September 27, 2020,
Dave said…
Appreciate the feedback Dave, thank you.
- At 9:40pm on September 27, 2020,
David C. Poland said…
Dave - I attended the auction and looked the early AW-23 Scott 5 knob radio over. No statement made of the working condition. I passed it up.
Sold for $750 plus 10% gallery fee plus 7 1/5% State tax - so pushing $890.
A lot of corroded chrome with some bubbling and pealing on the receiver and amp. Sovtec output tubes. The cabinet had been refinished with a rather flat finish which pretty well hid the beauty and depth of the fancy fiddle grain tropical Laurel veneers. Oil finish? The Richmond Designs repo Aztec speaker cloth (a darker 70% scale repo of the original gold cloth) has a bit of a green cast that, to me, did not compliment the blond cabinet.
I was not interested. Looked like more work that I was interested for result unsatisfactory to me. (I have an excellent example in that cabinet already.) Hope the buyer restores it, rather than parting it out, Properly restored electrically, a great sounding radio.
- At 8:11am on March 15, 2018,
John De Wit said…
Hi Dave
I sent a request for friend before I can PM you.
John
Dave's Blog
McMurdo Silver Schematic
Posted on January 21, 2017 at 12:48pm 8 Comments 0 Likes
Need help with schematics for the Masterpiece 6. There was an early/late version, mine the earlier with dual choke power supply. There may
Be other variations much like Scott.
Be other variations much like Scott.
© 2024 Created by Kent King.
Powered by
