EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Kent King's Discussions (1,028)

Discussions Replied To (952) Replies Latest Activity

"Yes, I looked at the RCA manual for the 56. Ideally I suppose I would have several c…"

Kent King replied Jan 1, 2021 to SCOTT NAPIER ALLWAVE 12

67 Feb 27, 2021
Reply by Thomas Day

"Lance - I have ordered a Hammond P-T156C choke from Antique Electronic Supply. I'm g…"

Kent King replied Dec 31, 2020 to SCOTT NAPIER ALLWAVE 12

67 Feb 27, 2021
Reply by Thomas Day

"Sorry - the site itself (ning.com) is rather limiting and doesn't really offer thing…"

Kent King replied Dec 29, 2020 to Finally got my AM FM Philharmonic

31 Feb 11, 2022
Reply by David C. Poland

"All - So there is a large choke that feeds the B+ to the plate of the 1st AF 56. In…"

Kent King replied Dec 28, 2020 to SCOTT NAPIER ALLWAVE 12

67 Feb 27, 2021
Reply by Thomas Day

"I'm game for any level of cabinet study! Speaking of the upsize Tasman - fellow memb…"

Kent King replied Dec 21, 2020 to Ravinia Grande cabinet

4 Dec 23, 2020
Reply by Bill Liers

"Since this is such a hot topic - go to the archive, in the Miscellaneous folder - I…"

Kent King replied Dec 18, 2020 to Wunderlich substitute

33 Dec 21, 2020
Reply by David Dodgen

"Schematics are in the Scott Info Archive in the Set Folders. There are two different…"

Kent King replied Dec 18, 2020 to Wunderlich substitute

33 Dec 21, 2020
Reply by David Dodgen

"Yes, that is the way. Do not lose the two springs and detent caps under the wheel. I…"

Kent King replied Dec 7, 2020 to SCOTT NAPIER ALLWAVE 12

67 Feb 27, 2021
Reply by Thomas Day

"Lance - Those values look reasonable based on my experience. Remember, Scott sets do…"

Kent King replied Dec 7, 2020 to SCOTT NAPIER ALLWAVE 12

67 Feb 27, 2021
Reply by Thomas Day

"For all of you...email me at kent3256@hotmail.com and I can provide a link to a OneD…"

Kent King replied Nov 26, 2020 to Scott News upload - how?

2 Nov 26, 2020
Reply by Kent King

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service