The Fine Things are Always Hand Made
allwave 12 audio interstage transformer.
I need the audio interstage transformer mounted on the receiver chassis. The transformer is connected between the second detector tube and the two 1st audio tubes. I think it is a one to one transformer. One of the secondary windings is open. Does anyone have one? The transformer has a number 1350.
Replies to This Discussion
-
Permalink Reply by Kent King on
-
On the AW12 sets, there is no transformer on the tuner chassis. There is an audio choke mounted under the chrome can on the tuner. Those chokes often go bad and the audio response is poor (no bass) when they are open. The AW15 sets do have a transformer between the 2nd Det and the 1st audio stage. What is the serial number of your set?
Thanks!
Kent
-
Permalink Reply by Robert Meader on
-
interstage.jpg See picture. This scott has two dials and plug-in coils to select bands,12 tubes so it is an aw12 but the schematic says "All Wave" super receiver chassis. Anyway I need that transformer. The primary connects to 2nd detector (27 tube) the secondary to two 27 tubes.
-
-
Sorry - yes, I usually refer to the Allwave Two-dial as the AW12-2. Let me check, I may have one on another chassis around here. I will try to look tomorrow.
Kent
© 2025 Created by Kent King.
Powered by
