EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Norman S Braithwaite's Discussions (848)

Discussions Replied To (839) Replies Latest Activity

"Thanks for your inquiry.  It is in my album featuring the art cabinet 800B.  Unfortu…"

Norman S Braithwaite replied Jul 1, 2013 to 800B tone control mod

19 Jul 10, 2013
Reply by norman david warren

"Yes, the error is in the wiring.  When I have time I will pull out a power amplifier…"

Norman S Braithwaite replied Jun 16, 2013 to Looking for Philharmonic Schematic Variations.

3 Jun 16, 2013
Reply by Norman S Braithwaite

"Scott: Have you identified details of the factory wiring error found in about half o…"

Norman S Braithwaite replied Jun 16, 2013 to Looking for Philharmonic Schematic Variations.

3 Jun 16, 2013
Reply by Norman S Braithwaite

"Poltergeists! My first suspicions would be the muting and AM/FM relays. Norman"

Norman S Braithwaite replied May 22, 2013 to 800B tuning motor

12 Jul 7, 2013
Reply by Keith Lowe

"The turntable is not original.  The original turntable would have consisted of a lar…"

Norman S Braithwaite replied May 22, 2013 to Scott Philharmonic Waverly Grande

7 May 30, 2013
Reply by Scott Seickel

"Ken: Unfortunately, based on the photos, there is not much on the positive side that…"

Norman S Braithwaite replied May 21, 2013 to Scott Philharmonic Waverly Grande

7 May 30, 2013
Reply by Scott Seickel

"Keith: If you have the larger gear attached to the tuning shaft, by all means use it…"

Norman S Braithwaite replied May 21, 2013 to 800B tuning motor

12 Jul 7, 2013
Reply by Keith Lowe

"Joe: Just a thought based on prior experience... Try loosening and retightening all…"

Norman S Braithwaite replied May 20, 2013 to Need Help with AW12 Dual Dial

35 May 23, 2013
Reply by Angelo

"The remote operated Scott radios from before WWII used the fine pitch pinion gear. …"

Norman S Braithwaite replied May 20, 2013 to 800B tuning motor

12 Jul 7, 2013
Reply by Keith Lowe

"Keith: OK, there are two brass pinions.  One attached to the motor armature and the…"

Norman S Braithwaite replied May 20, 2013 to 800B tuning motor

12 Jul 7, 2013
Reply by Keith Lowe

RSS

© 2025   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service