EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

Hello,

Can anyone share a photo or two showing the correct knobs for an Allwave 12 Deluxe?

Thanks,

John

Views: 179

Reply to This

Replies to This Discussion

John - See the pics I just posted of the knobs on my Napier in another thread...Kent

Thanks for the pictures.

IMG_1728.JPG

The trio of "ship wheel" knobs are most commonly seen on an AW-12. (also on early AW-15 production).

Seen as either pebbly like the trio or smooth like the far lower right.

The left rear tone control and the two right side mounted antenna tuner controls would match the front knobs.

Had a really early AW-12 with the far upper right smooth round (style like on the 2-Dial Scott of 1931)

Thanks, David. I need replacements for the side mounted antenna controls. Have you seen these come up for sale often?

David C. Poland said:

IMG_1728.JPG

The trio of "ship wheel" knobs are most commonly seen on an AW-12. (also on early AW-15 production).

Seen as either pebbly like the trio or smooth like the far lower right.

The left rear tone control and the two right side mounted antenna tuner controls would match the front knobs.

Had a really early AW-12 with the far upper right smooth round (style like on the 2-Dial Scott of 1931)

Here's my AW12 side knobs. I just noticed I have the arrow pointed in the wrong direction.

Let me try the picture again.

Attachments:

Yes - at swap  meets,  paw through the inventory of knob sellers. 

Or contact the knob lady:  Julie McCall.  radiopup@bellsouth.net         lives in Tennessee

The smaller ship wheel knobs are 7/8 inch diameter. 

send her a photo of one of your front knobs,

The is a slightly different version sometimes seen with white arrow, but be scarce.

Reply to Discussion

RSS

© 2022   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service