EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

I am not sure if this is appropriate to put on this site so I will ask first. I have been looking for two knobs for my Phantom Deluxe for some time. I was missing one regular round knob and one of the thumb type knobs (not sure exactly what these knobs are called) In any case, I ran into a guy who locally who makes exact replicas of the Zenith Z knobs used on many of the Zenith radios in the

1936 to 1938 range and sells quite a few to collectors. I gave him samples of the two EH Scott knobs I needed and his knobs were amazingly accurate! He makes them out of walnut and digitizes the design and then laser cuts the face of the knob including the S and all cross hatching.  When the knobs are on the radio you can't tell an original from the repro.  Only when you remove the knobs and look at the brass insert can you tell which one is new (the bright brass gives it away).  I am not sure if there are others looking for a knob(s) but these are as close to the originals as I have seen.  If others are looking, I would be happy to post the guys contact info.

Views: 259

Reply to This

Replies to This Discussion

Any chance of a photo?

Sure I will take a few and post. It will be a few days as I just left town for business.

This is totally appropriate and the type of info we should share with each other. Knobs are a headache, everyone is looking for them. I'd consider funding a number of repros to be available here...what do you all think?

Kent

Kent, I think that is a great idea. I found this guy on line who happened to sell Zenith repro knobs. People who had bought them rave about them. I reached out to the guy (Ben) over the internet. He said he would be happy to try to duplicate one if he had an original sample. Not knowing where he was located I asked for his mailing address....only to find out he lives 5 miles away from me. He made me a “sample” and it looks awesome. (He collects Zenith radios from the 30’s) I primarily collect repwood radios but have a couple of Scott’s as well. I was always missing one knob for my Emerson Mickey Mouse repwood radio. I have never even seen one for sale in 25 years. He made a perfect copy out of walnut for me. Once I post some pictures I am sure you guys will be happy with his work. Forrest

Forest - great contribution to this forum.

The other type knobs are referred to as "pinch" type.

Forest - That's great news. Can he do a run of, say, 10 or 20 of each style? I'm able to provide examples if he needs them, sounds like he's already seen yours. Let me know...this is really great!

Kent

Kent, I am sure Ben would be willing to make a run of them. He does have one each of the round and pinch knobs (see, I used the correct name). Now that the design on the knob is digitized, the laser does the work on creating the design on the face. He does hand turn each knob on a lathe. He wasn’t quite happy with his first “test” knobs (although they looked great to me) but he now has knobs he is happy with. I will post some pictures when I get back to town. I could also send a sample of the knobs if you would want to take a look at them. I would just need to know where to send them. Once I speak with Ben I will also send you or post his contact info. One question, I am guessing the original design on the knobs were “pressed” under pressure to creat the design on the face of the knobs? They obviously did not have lasers back then and it would have been way too tedious to try to carve the design.
I should have asked earlier. I am only aware of the wood knobs that are on the Phantom. Were there other styles or wood knobs that were used on on other EH Scott radios? If so, I am sure Ben would be happy to produce them.

I posted this a few years ago, but not everyone has access to a lathe,

https://ehscott.ning.com/forum/topics/wooden-knobs

Thanks...I recalled your post on the knobs...I am glad we have the skills to continue to make these much needed parts. 

Kent

mike hadley said:

I posted this a few years ago, but not everyone has access to a lathe,

https://ehscott.ning.com/forum/topics/wooden-knobs

I suspect the knobs were done with a press back then. Having a die cut, you could punch out many knobs each day. Today's laser tools are superior though.

Kent

Forrest Wagner said:

Kent, I am sure Ben would be willing to make a run of them. He does have one each of the round and pinch knobs (see, I used the correct name). Now that the design on the knob is digitized, the laser does the work on creating the design on the face. He does hand turn each knob on a lathe. He wasn’t quite happy with his first “test” knobs (although they looked great to me) but he now has knobs he is happy with. I will post some pictures when I get back to town. I could also send a sample of the knobs if you would want to take a look at them. I would just need to know where to send them. Once I speak with Ben I will also send you or post his contact info. One question, I am guessing the original design on the knobs were “pressed” under pressure to creat the design on the face of the knobs? They obviously did not have lasers back then and it would have been way too tedious to try to carve the design.

scott%20knob.jpeg

Not sure if these pictures of the knobs will show up.  Side by side example of an original and a repro wood knob that Ben has made.  He is working on the pinch knob now and is still working on refining this round knob design a bit.  The repro obviously has the crisper cross hatching on the knob face.

Reply to Discussion

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service