EH Scott Radio Enthusiasts

The Fine Things are Always Hand Made

I look for the Power supply Scott Philharmonic.

Hello dear fans of radio SCOTT.
I look for the Power supply Scott Philharmonic .
Perhaps someone can offer it for sale?
Thank you in advance for the help.
With respect and the best regards.

Views: 308

Reply to This

Replies to This Discussion

Still I continue search!
I will be glad to offers on sale.
Yours faithfully.

Which one? and early one or a late one?  Where are you located?

Hello.
Thanks for the answer!
I have here such receiver (on a photo)
To it also I look for suitable Power supply.
Location:Elizabeth NJ,United States.
Yours faithfully Vitaliy.

Nice cosmetics on your 33 tube FM/AM Scott Philharmonic model of 1940 or 1941. Your receiver should have 27 tubes including the pair of eye tubes.  The proper 6 tube amp uses a pair of  5U4 rectifiers (rather than the 5Z3's used for earlier Philharmonics) and four 6L6 output tubes,  which I believe is the same amp as the later AM only Philharmonic.

Hello David C. Poland.
Thanks for an assessment of a condition of the receiver.
The tuner after cleaning and polishing of chrome.
Yes it is model on 33 tube.
Unfortunately I can't still find to it Power supply.
The case already at a readiness stage.
Yours faithfully Vitaliy.

I do not have a late model power supply for that.  I might have an early Philly power supply available, pending a deal I have coming up.  It does not have good chrome, or the original capacitors.  Do you have the 15" speaker for this set? 

Hello Scott Seickel .
It is a pity - I again wasn't lucky.
If you have for sale such amplifier - will be grateful for the offer.
15" I have no speaker.
Now I work on reproduction of the case to this receiver.
Yours faithfully Vitaliy.

The case of the receiver is finished.
The case made.
Unfortunately the original case can't be brought (delivery madly expensive).
Unfortunately Power supply is still not bought!
Still I look for Power supply, I will be grateful for the help in purchase.
With respect and the best regards Vitaliy.


Vitaly: Wonderful work on the case. While an original power supply may be difficult to find, you may have some success in building a new one. If you know electronics or have a friend who can, The required B+ and filament voltages can be provided, and the audio sent to a separate power amp.

Thom
Vitaliy said:

The case of the receiver is finished.
The case made.
Unfortunately the original case can't be brought (delivery madly expensive).
Unfortunately Power supply is still not bought!
Still I look for Power supply, I will be grateful for the help in purchase.
With respect and the best regards Vitaliy.

Hello Thom.
Thanks for a positive review about my work.
To manufacture the new efficient power unit + the amplifier for me doesn't present any difficulties.
However I very much want to have the original power unit to this receiver!
And persistently I look for it.
With respect and the best regards Vitaliy.

Reply to Discussion

RSS

© 2024   Created by Kent King.   Powered by

Badges  |  Report an Issue  |  Terms of Service