Philharmonic remote control

[John Chidgey]

Hello,

Looking for a photo of scratch suppressor switch on a remote control unit. Tried to install a scratch suppressor switch from a non-remote unit and there are gears in the way.

Thanks in advance

John

[Norman S Braithwaite]

The scratch suppressor switch on my remote control Philharmonic is a low profile rotary switch rather than the usual push-pull type switch.

Norman

[John Chidgey]

Would you tell me the style of knob that is used for the low profile rotary switch?

Norman S Braithwaite said:

The scratch suppressor switch on my remote control Philharmonic is a low profile rotary switch rather than the usual push-pull type switch.

Norman

[Norman S Braithwaite]

Photos...

[John Chidgey]

Thanks, Norman very helpful

Norman S Braithwaite said:

Photos...

[David C. Poland]

John - I have a small rotary toggle switch from a junker Scott Masterpiece parts set.

Looks to be much like Norman's photo. Shaft will extend 1 7/8 inch from the front of the chassis apron.

Will fit to avoid those tuning gears -  I checked it on the remote control BOL chassis on my workbench.

But is the shaft length long enough?- may be close. 

Would work with the kind of knob that recesses into the cabinet a bit on the shaft.

Just shot it with spray contact cleaner and functions Ok with a meter.

If interested - [e-mail]